In many aspects of work, welded pipe equipment is needed and is increasingly valued by people. In order to effectively improve work efficiency, the editor will share his practical experience with everyone, hoping to be helpful to you. The details are as follows:

1. Firstly, we need to regularly check the oil level gauge on the oil tank of the welded pipe equipment, and the oil level should not be lower than the specified value.

2. When the fine oil filter is blocked by dirt, it needs to be replaced in a timely manner; When the crude oil filter is blocked, it should be cleaned in a timely manner, once every 3 months.

3. When adding oil to the oil tank of the welding pipe equipment, it must be filtered and the oil must not be mixed with impurities such as water, rust, metal shavings, and fibers.

4. When starting the oil pump in winter or cold areas, it should be started, stopped, and repeated several times to increase the oil temperature. The hydraulic pump station should be operated flexibly before starting work.

5. All knobs on the hydraulic pump station of the welded pipe equipment shall not be moved by non operators.

6. Regularly observe if there are abnormal fluctuations in the power supply voltage, and conduct maintenance every 3 months or so.